Digital Inputs

Digital Inputs can be programmed in the Discrete_Inputs program (highlighted blue below).  Each input has a DelayOnDelayOff programming block.  The top 2 numbers are the milliseconds delay on and milliseconds delay off for the input.  Every input should have at least some amount of time on and off.  If the input device is a level switch or other device that requires more delay, change these values.  The signal can be inverted if needed for the programming logic on the third setting.  The fourth setting is the actual PLC input tag.  On the righthand side, this should be the name of the input used throughout the PLC logic when needed.